Jet Ski Traction
🛠️ How to Install Your Jet Ski EVA Traction Mat
Installing your Summer Vibes Jet Ski EVA traction mat is quick and DIY-friendly. Follow the steps below for a clean, long-lasting bond.
-
Remove old turf (if applicable)
Carefully peel away existing jet ski turf or deck grip. Use gentle heat if required to soften old adhesive. -
Thoroughly clean the surface
Remove all glue, wax, salt and dirt. Wipe down using isopropyl alcohol for best adhesion. -
Test fit and trim
Dry-fit the EVA mat and trim to shape using sharp scissors or a blade. Measure twice for best results. -
Peel backing gradually
Peel a small section of the 3M marine adhesive backing to begin positioning. -
Apply with firm pressure
Work slowly from one end, pressing firmly to avoid air bubbles. -
Allow adhesive to cure
For best results, leave the ski dry and unused for 12–24 hours.
Pro tip: Install in warm, dry conditions for maximum adhesive performance.
✂️ Can I Cut the Mat to Fit My Jet Ski?
Yes — the Summer Vibes EVA traction mat is designed to be fully cut-to-fit. The high-density foam trims cleanly with sharp scissors or a utility knife.
This makes it perfect for:
- Custom jet ski turf installs
- Footwell coverage
- Swim platforms
- Stand-up jet ski builds
- Freestyle and race skis
Always dry-fit before removing the adhesive backing.
⏱️ How Long Does the Adhesive Take to Bond?
The marine-grade 3M pressure adhesive forms an immediate hold, but full cure strength is achieved after 12–24 hours.
Best practice:
- Keep the ski dry during cure time
- Avoid riding immediately after install
- Apply firm pressure during installation
Once cured, the bond is extremely durable in harsh marine environments.
🌊 Will This Work on My Jet Ski or PWC?
This traction mat is compatible with most major jet ski and personal watercraft (PWC) platforms including:
- Sea-Doo models
- Yamaha WaveRunner models
- Kawasaki Jet Ski models
- Stand-up jet skis
- Freestyle builds
- Custom performance skis
If your ski has a flat mounting surface, this EVA mat will work perfectly when trimmed to size.
FAQs
We aim to ship within 24hrs of receiving your order. If there is a delay we will contact you and notify you of any changes. During peak holiday periods we may have a slight delay with increased orders but we do our best to get you in the water as soon as possible.
We use Australia’s fastest couriers to get products to your door. Most of our products ship for FREE, however bulky items, such as boards may attract a charge. Rates vary depending on product & your location. Simply add your desired product to your cart and proceed through our checkout, enter your delivery address and you’ll be able to see the shipping charge. For surfboard deliveries, we prefer to deliver to business addresses to ensure security of your board after delivery.
We ship from Australia to all around the world, including New Zealand, Indonesia, Japan, USA. Please enter your address details at checkout to see a quote. Note that some countries are extremely expensive. Also shipping Surfboards international is not possible. Feel free to ask us for a quote using our contact form on our website.
Yes, if you reside on the Gold Coast and have selected to pick up your order, you can pick up from our partner fulfilment centre at GC3PL at 14 Hawker St, Currumbin Waters. Please work with us to find out our best available warehouse times using the contact form on our website.
Yes we can ship most small items to a PO Box. Bulky items may not be possible. Feel free to check with us using the contact form on our website.
We provide tracking as soon as we dispatch so you can follow progress to your door. Items are sent ‘Authority to leave’ so please ensure you are home to receive, or contact the deliverer to make a plan.
If you've not received your order confirmation, check your junk folder in case your inbox has sent it there. If you've been charged and not received your order confirmation and it is not in your junk folder, please contact us as soon as possible at contact@summervibes.com.au
